KOS Flat Arm Support | 1" Arm Support
1
Ergonomic Arm Support for Production Applications
Reduce Discomfort and Stress
Wedge-ease introduces a new product category designed for production applications where users must maintain awkward and unsupported arm positions. The 25mm Regular Stacker Arm Rest is a simple and economical solution that eliminates awkward postures of the neck, back, forearms, and wrists. It works with most microscopes and serves as an ideal elbow cushion.
Comfortable Working Posture
Created by an Ergonomist, these arm supports are designed to support wrists and forearms in a neutral posture, helping to reduce fatigue and discomfort. Without the 25mm Regular Stacker, workers may hunch over with bent wrists and forearms leaning on hard surfaces, resulting in unsteady hands and discomfort.
Enhanced Ergonomics
With the 25mm Regular Stacker, workers can sit upright with full chair support.
The microscope can be adjusted to fit their height, with wrists fully
supported, resulting in steady hands and a proper neutral posture for the head,
neck, back, and arms.
Versatile Use
This arm support can also be used as a stacker to raise wedges to an ideal
height.
Key Features
- Non-Slip Base: Ensures stability during use.
- Soft and Durable PU: Provides lasting comfort.
- Eliminates Contact Stress: Reduces the risk of repetitive strain injuries (RSI) due to awkward postures.
- Easy to Clean: Wipe with mild detergents.
- Space-Saving Design: Takes up minimal workspace.
Additional Benefits
- Ideal for Production Applications: Supports comfortable working postures.
- Compatible with Most Microscopes: Ensures versatility.
- Designed by Ergonomists and Physical Therapists: Provides optimal support for wrists, forearms, and elbows.
Only available in blue.
This product is no longer available.
Posture Tips & Improved Ergonomics
Sitting for long periods can often lead to discomfort or pain, especially in areas like your hips, lower back, and tailbone. Here are some simple, effective tips to help improve your posture and reduce common issues like hip pain when sitting, lower back pain when sitting, and tailbone pain when sitting.
1. Support Your Lower Back
If your lower back hurts when sitting, it's often due to a lack of proper support. Make sure your chair has good lumbar support to keep your spine aligned. You can also use a small cushion to provide extra support if needed.
2. Keep Your Hips at the Right Angle
When your hip hurts when sitting, it may be due to poor alignment. Your hips should be level with or slightly higher than your knees. Adjust your chair height so your feet are flat on the ground and your knees form a 90-degree angle. This can help reduce hip joint pain while sitting and prevent buttock pain when sitting and lying down.
3. Adjust Your Seat Position
For those dealing with coccyx pain when sitting or a sore tailbone from sitting, ensure your seat isn’t pressing too hard on your tailbone. Try a cushion with a cut-out section to relieve pressure on the tailbone and improve comfort.
4. Move Regularly
If you feel buttock ache when sitting or hip discomfort when sitting, it's a sign that your body needs a break. Stand up, stretch, or take a short walk every 30-60 minutes. Regular movement can ease tension and prevent hip ache when sitting or lower back pain while sitting.
5. Exercise for Strength and Flexibility
A good workout for back pain can strengthen your core and back muscles, reducing discomfort. Exercises like gentle stretches or yoga can help relieve bottom pain when sitting, butt pain while sitting, and improve overall posture.
By following these posture tips and incorporating ergonomic tips into your daily routine, you can reduce discomfort and improve your overall well-being while sitting. Make sure to listen to your body and adjust your workspace as needed to stay comfortable throughout the day.
Download Your FREE Posture Watch Poster!
Get Serious About Your Posture With This Helpful, Free Reminder!
Reduce Discomfort and Stress With The KOS Flat Arm Support!
Wedge-ease introduces a new product category designed for production applications where users must maintain awkward and unsupported arm positions. The 25mm Regular Stacker Arm Rest is a simple and economical solution that eliminates awkward postures of the neck, back, forearms, and wrists. It works with most microscopes and serves as an ideal elbow cushion.
Comfortable Working Posture
Created by an Ergonomist, these arm supports are designed to support wrists and forearms in a neutral posture, helping to reduce fatigue and discomfort. Without the 25mm Regular Stacker, workers may hunch over with bent wrists and forearms leaning on hard surfaces, resulting in unsteady hands and discomfort.
Enhanced Ergonomics
With the 25mm Regular Stacker, workers can sit upright with full chair support. The microscope can be adjusted to fit their height, with wrists fully supported, resulting in steady hands and a proper neutral posture for the head, neck, back, and arms.
Versatile Use
This arm support can also be used as a stacker to raise wedges to an ideal height.
Key Features
- Non-Slip Base: Ensures stability during use.
- Soft and Durable PU: Provides lasting comfort.
- Eliminates Contact Stress: Reduces the risk of repetitive strain injuries (RSI) due to awkward postures.
- Easy to Clean: Wipe with mild detergents.
- Space-Saving Design: Takes up minimal workspace.
Additional Benefits
- Ideal for Production Applications: Supports comfortable working postures.
- Compatible with Most Microscopes: Ensures versatility.
- Designed by Ergonomists and Physical Therapists: Provides optimal support for wrists, forearms, and elbows.
Only available in blue.
Alternative Products
To install this Web App in your iPhone/iPad press 
and then Add to Home Screen.
